{"title":"D-LINE SERIES","description":null,"products":[{"product_id":"powerx-pro-d-line-3000","title":"D LINE 3000","description":"\u003ch3\u003eD LINE 3000\u003c\/h3\u003e\n\u003cp\u003eIntroducing the D LINE 3000, a fiercely articulate two-channel amplifier from the formidable D LINE series, crafted to be the rock-solid backbone for professional live sound environments and dedicated fixed installations. Powered by innovative Class 1™ output circuitry, this amplifier maximizes electrical efficiency while maintaining the pristine sonic characteristics essential for high-fidelity sound reinforcement. Designed for discerning sound engineers and system integrators, it stands as the ideal high-energy workhorse for driving full-range front-of-house mains, critical stage wedges, and auxiliary delay stacks with uncompromising reliability.\u003c\/p\u003e\n\u003cp\u003eThe D LINE 3000 delivers highly versatile, raw power across a variety of demanding speaker loads, generating a punchy 650 watts per channel at 8 ohms, 1000 watts at 4 ohms, and a resilient 1300 watts per channel into 2-ohm stereo configurations. When deployed in bridged mono mode, it transforms into a potent low-frequency titan, outputting 2000 watts at 8 ohms and a fierce 2600 watts at 4 ohms. The amplifier’s rapid slew rate, measuring above 10V\/us, ensures that high-velocity transients are captured flawlessly, while a damping factor greater than 300 exerts total electro-mechanical control over your woofer cones. The result is generous acoustic headroom and aggressively tight low-frequency performance that never loses its focused impact.\u003c\/p\u003e\n\u003cp\u003eSignal flow and system routing are effortlessly managed by a highly adaptable rear-panel control suite. Technicians can seamlessly match the amplifier to any front-end architecture using the variable input sensitivity switch, offering standard 0.775V, 1 V, and 32 dB operating parameters. The precision input stage ensures maximum signal integrity with a 20k ohm balanced and 10k ohm unbalanced input impedance. Furthermore, a rigorous crosstalk rejection specification of greater than 65dB guarantees exceptional channel separation, allowing operators to run vastly different monitor mixes or processing zones through each channel without fear of cross-contamination.\u003c\/p\u003e\n\u003cp\u003eAudio purity remains at the absolute core of the D LINE 3000’s design, highlighted by a meticulously flat frequency response spanning 20Hz to 20kHz (+0\/-1.5 dB). Dynamic range is heavily preserved by a signal-to-noise ratio exceeding 90dB, instantly plunging the system into total silence when no audio signal is present. Total Harmonic Distortion plus Noise (THD+N) remains tightly suppressed below 0.5%, ensuring the mix stays exceptionally clean and musical even as you approach clipping limits. Paired with a precisely calibrated voltage gain of 39.3 dB, the amplifier guarantees your source audio is magnified with breathtaking transparency and zero unwanted coloration.\u003c\/p\u003e\n\u003cp\u003eHoused in a rugged 20 kg enclosure, the D LINE 3000 is engineered to shrug off the daily abuse of live event production and grueling permanent installs. Its robust internals are shielded by a comprehensive array of automated protections, including short circuit, DC fault, overload, overheating, soft start, and clip limiting defenses, all actively sustained by a high-velocity front-to-rear cooling system. Delivering brilliant acoustic detail backed by ironclad dependability, the D LINE 3000 is a relentless performance tool that ensures your sound system operates flawlessly night after night.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"POWERX PRO","offers":[{"title":"Default Title","offer_id":49604089675928,"sku":null,"price":0.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/1016\/3096\/files\/POWERX_DL_4000_FIN_1.png?v=1785412455"},{"product_id":"powerx-pro-d-line-4000","title":"D LINE 4000","description":"\u003ch3\u003eD LINE 4000\u003c\/h3\u003e\n\u003cp\u003eStep up to the D LINE 4000, a relentlessly capable two-channel amplifier from the esteemed D LINE series, forged to operate as the high-performance backbone of modern live sound rigs and premium fixed installations. Utilizing advanced Class 1™ output circuitry, this model strikes a perfect equilibrium between aggressive power delivery and sustained thermal composure. It is precisely engineered for audio professionals and installers who require a heavy-duty, dependable engine to drive mid-sized line arrays, high-output point-source enclosures, and formidable sub-bass systems with absolute confidence.\u003c\/p\u003e\n\u003cp\u003eEngineered for undisputed authority across multiple load configurations, the D LINE 4000 pushes a commanding 850 watts per channel at 8 ohms, expanding to 1350 watts at 4 ohms, and a robust 1850 watts per channel at a punishing 2 ohms in stereo mode. Should you need to consolidate its force, bridging the amplifier yields a massive 2800 watts into 8 ohms and an immense 3600 watts into 4-ohm loads. Backed by a high-speed slew rate greater than 10V\/us, it delivers exceptional transient response to cleanly capture explosive percussive attacks. A damping factor exceeding 300 guarantees relentless grip over low-frequency drivers, translating to immense dynamic headroom and distinctly tight, chest-thumping bass response.\u003c\/p\u003e\n\u003cp\u003eSeamless integration into complex audio ecosystems is achieved through the D LINE 4000's highly flexible input and control architecture. Engineers can effortlessly match system processors or consoles via the multi-stage input sensitivity selector, featuring standard 0.775V, 1 V, and 32 dB thresholds. The precision input stage is designed for optimal signal transfer, offering a balanced input impedance of 20k ohms alongside 10k ohms unbalanced. Superior stereo imaging and channel isolation are strictly maintained thanks to a crosstalk rating of over 65dB, ensuring that complex dual-zone or stereo routing remains completely independent and free of signal degradation.\u003c\/p\u003e\n\u003cp\u003eThe sonic integrity of the D LINE 4000 is defined by its pristine acoustic fidelity, characterized by a ruler-flat frequency response from 20Hz to 20kHz (+0\/-1.5 dB). It operates with a highly transparent signal path, utilizing a signal-to-noise ratio greater than 90dB to guarantee an imperceptible noise floor during quiet, critical passages. Total Harmonic Distortion plus Noise (THD+N) is strictly regulated below 0.5%, preventing harshness even when the system is pushed to its operational limits. Driven by a precise voltage gain of 40 dB, this unit ensures that every frequency is reproduced with clinical accuracy, rich uncolored tone, and brilliant clarity.\u003c\/p\u003e\n\u003cp\u003eEncased in a road-ready 21 kg chassis, the D LINE 4000 is built to withstand the punishing demands of both rigorous touring schedules and intensive permanent installations. Reliability is guaranteed by an aggressive front-to-rear active cooling tunnel and an exhaustive suite of intelligent protections, deploying soft start, DC, short circuit, overload, thermal, and clip limiting protocols alongside VHF safeguards. Melding tactical build quality with exceptional sonic muscle, the D LINE 4000 is a formidable asset that ensures pristine, uninterrupted audio delivery in the most demanding real-world environments.\u003c\/p\u003e","brand":"POWERX PRO","offers":[{"title":"Default Title","offer_id":49604089905304,"sku":null,"price":0.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/1016\/3096\/files\/POWERX_DL_4000_FIN_acb6d1ae-b9cb-426e-9e3b-001288ee8528.png?v=1785412458"},{"product_id":"powerx-pro-d-line-5000","title":"D LINE 5000","description":"\u003ch3\u003eD LINE 5000\u003c\/h3\u003e\n\u003cp\u003eMeet the D LINE 5000, the flagship dual-channel powerhouse of the D LINE series, engineered to serve as the unyielding backbone for demanding live sound reinforcement and premier fixed installations. Built around a highly efficient Class 1™ amplifier topology, this unit delivers devastating electrical efficiency and relentless output without compromising thermal stability. Designed for professional audio technicians who refuse to settle, the D LINE 5000 provides a rock-solid foundation for arena-scale line arrays, massive subwoofer clusters, and high-SPL stage monitoring systems.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to raw, uncompromising power, this amplifier obliterates the competition, delivering a massive 1200 watts per channel at 8 ohms, 1800 watts at 4 ohms, and a staggering 2600 watts per channel into ultra-demanding 2-ohm stereo loads. For applications requiring cataclysmic output, deploying the unit in bridged configuration unleashes 3600 watts at 8 ohms and an earth-shattering 5500 watts at 4 ohms. A formidable slew rate exceeding 10V\/us guarantees lightning-fast transient response, while a damping factor greater than 300 ensures absolute low-frequency cone control. This translates to massive acoustic headroom and deep, concussive bass that remains incredibly tight and articulate even at the absolute limits of operation.\u003c\/p\u003e\n\u003cp\u003eRouting flexibility and pristine signal management are at the forefront of the D LINE 5000’s rear-panel architecture. System technicians can instantly calibrate their gain structure utilizing the versatile input sensitivity selector switch, offering precise 0.775V, 1 V, and 32 dB operating levels. The front end effortlessly accommodates a wide array of sources with an optimal input impedance of 20k ohms for balanced signals and 10k ohms for unbalanced connections. Furthermore, exceptional channel separation is guaranteed by a crosstalk specification of over 65dB, meaning complex stereo mixes and discrete routing paths maintain their spatial imaging without hazardous bleed or interference.\u003c\/p\u003e\n\u003cp\u003eAcoustic fidelity is preserved with surgical precision, boasting a sweeping frequency response of 20Hz to 20kHz (+0\/-1.5 dB) to capture every micro-dynamic of your source material. Audio purity is aggressively shielded by a signal-to-noise ratio exceeding 90dB, ensuring a dead-quiet noise floor during critical pauses in the performance. Total Harmonic Distortion plus Noise (THD+N) is kept strictly under 0.5%, maintaining the utmost signal integrity even when the amplifier is driven to its peak. Combined with a commanding voltage gain of 42.3 dB, the D LINE 5000 guarantees that the sonic signature remains transparent, uncolored, and fiercely accurate from the input stage to the heavy-duty Speakon outputs.\u003c\/p\u003e\n\u003cp\u003eConstructed for the relentless rigors of touring and permanent integration, the D LINE 5000 houses its massive potential within a rugged 30 kg chassis. It is fortified by a comprehensive, automated protection suite that includes soft start, DC fault, short circuit, overload, clip limiting, overheat, and progressive volume safeguards, all kept optimally cool by a highly efficient front-to-rear airflow system. Delivering monstrous output and bulletproof reliability under the most punishing real-world conditions, the D LINE 5000 stands as an elite amplification solution for professionals who demand nothing short of absolute sonic supremacy.\u003c\/p\u003e","brand":"POWERX PRO","offers":[{"title":"Default Title","offer_id":49604090167448,"sku":null,"price":0.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/1016\/3096\/files\/POWERX_DL_5000_FIN.png?v=1785412462"}],"url":"https:\/\/www.powerx.pro\/collections\/d-line-series.oembed","provider":"POWERX PRO","version":"1.0","type":"link"}